Elaboration de membranes pour piles à combustible à architecture réseaux (semi-)interpénétrés de polymères / Virginie Delhorbe ; sous la direction de Odile Fichet

Date :

Type : Livre / Book

Type : Thèse / Thesis

Langue / Language : français / French

Polymères

Piles à combustible

Fichet, Odile (19..-.... ; chercheuse en physicochimie) (Directeur de thèse / thesis advisor)

Pourcelly, Gérald (Rapporteur de la thèse / thesis reporter)

Cloutet, Éric (Rapporteur de la thèse / thesis reporter)

Morin, Arnaud (1978-....) (Membre du jury / opponent)

Chikh, Linda (Membre du jury / opponent)

Mercier, Régis (19..-....) (Membre du jury / opponent)

Hemery, Patrick (Membre du jury / opponent)

Université de Cergy-Pontoise (1991-2019) (Organisme de soutenance / degree-grantor)

École doctorale Sciences et ingénierie (Cergy-Pontoise, Val d'Oise) (Ecole doctorale associée à la thèse / doctoral school)

Laboratoire de physico-chimie des polymères et des interfaces (Cergy-Pontoise, Val d'Oise) (Laboratoire associé à la thèse / thesis associated laboratory)

Résumé / Abstract : Les membranes polymères utilisées actuellement dans les piles à combustible voient leurs performances diminuer à haute température (T > 90°C) et à faible humidité relative (HR < 50%) [1]. Cette diminution est principalement liée aux pertes des propriétés mécaniques et de conduction dans ces conditions. Afin de remédier à ces inconvénients, des membranes originales présentant une architecture de réseaux (semi-)interpénétrés de polymères [2] ((semi-)RIP) dans lesquelles un réseau hydrophobe est associé à un réseau hydrophile, ont été développées dans le cadre du projet ANR PAN-H « AMEIRICC ».Ces membranes sont constituées d'un réseau fluoré assurant la tenue mécanique et d'un réseau polyélectrolyte sulfoné assurant la conduction protonique du matériau, chacun des réseaux étant issu de différents précurseurs fournis par l'IAM et le LMOPS. Après la réaction de polymérisation/réticulation des deux réseaux, les matériaux sont caractérisés afin de réaliser un retour rapide sur leur synthèse et d'optimiser cette dernière pour parvenir à un matériau présentant les principales propriétés recherchées (conductivité protonique, stabilité thermique et chimique, principalement). Une fois la synthèse optimisée, des premiers matériaux ont été fournis au LMPB, au SPrAM et au LITEN pour la validation des membranes sélectionnées. Les propriétés structurales et les valeurs de conductivité des matériaux ont permis de conclure que les (semi-)RIP présentent une morphologie similaire à celle décrite pour le Nafion dans laquelle la phase fluorée et la phase conductrice ionique sont co-continues. Plusieurs séries de ces membranes ont ensuite été réalisées en modifiant la composition chimique afin d'étudier la variation des propriétés des matériaux obtenus. Enfin, les premiers tests en pile à combustible de ces membranes originales se sont révélés prometteurs.[1] R. Borup, J. Meyers, B. Pivovar, Chem. Rev. 107 (2007) 3904.[2] L. H. Sperling and V. Mishra. The current status of interpenetrating polymer networks. In: Kim SC, Sperling LH, editors. IPNs around the world: science and engineering. New York: Wiley; 1997: p. 1-25.

Résumé / Abstract : The polymer membranes currently used in fuel cells are reducing their performance at high temperature (T > 90°C) and low relative humidity (RH < 50%) [1]. This decrease is mainly due to loss of mechanical properties and conduction in these conditions. To overcome these drawbacks, unique membranes having an architecture (semi-) interpenetrating polymer network [2] ((semi-) IPN) in which a hydrophobic network is associated with a hydrophilic network, were developed under PAN-H “AMEIRICC” ANR Project.These membranes consist of fluorinated network ensuring the mechanical and sulfonated polyelectrolyte network ensuring the proton conduction of material, each network being derived from different precursors provided by IAM and LMOPS. After the polymerization/cross linking reaction of the two systems, materials are characterized to carry out a rapid return on their synthesis and optimize it to achieve a material with the main properties (proton conductivity, thermal and chemical stability, primarily). Once the synthesis is optimized, the first materials were provided to LMPB, SPrAM and LITEN for validation of selected membranes.The structural properties and conductivity values of materials led to the conclusion that (semi-) IPN have a similar morphology to that described for the Nafion in which the fluorous phase and the ionic conducting phase are co-continuous.Then several series of these membranes were conducted by changing the chemical composition in order to study the variation of obtained material properties. Finally, the first fuel cell test of original membranes have shown promise.[1] R. Borup, J. Meyers, B. Pivovar, Chem. Rev. 107 (2007) 3904.[2] L. H. Sperling and V. Mishra. The current status of interpenetrating polymer networks. In: Kim SC, Sperling LH, editors. IPNs around the world: science and engineering. New York: Wiley; 1997: p. 1-25.